True Image 11 Home abort during installation
Hello
today I try to install True Image 11 Home on completely new installed XP Prof SP3 PC with Mainboard Asrock K8Upgrade-NF (NVIDIA nForce3 250 chipset).
All drivers (NVIDIA Chipset, Sound, Ethernet, Graphic, BIOS) are installed by latest version from Asrock Homepage. Also the NVIDIA ATA/SATA driver diskette will be used during installation of XP.
When I install TI first all seem to be OK. Installation starts wuthout problems.
At the time where the progrss bar is the second time near 100% the computer reboot without any messages.
Afte
r the boot I get the message that a new device was found named Acronis Backup Explorer and few seconds later I get a abort message form windows for a service. But I could not found which service.
When I go step by step through the hardware installation assistant I get the message that the file timntr_2k.sys is not found. There is only a timntr.sys into Windows\System32\Drivers directory.
Copy them and rename the copy will solve the problem but then I get a second message for timfiltr.sys (hope it is the right name; I don´t write them down). This will found into a Lastgood directory.
Copy them back to drivers directoy finish the hardware installation sucessfull.
But after them TI doesn´t work. Double click on the program icon ends with a runtime error without any information.
Second try to install abort at the same position.
Abort message at start of Windows for the service are still happen.
TI could not deinstall because there are no entry into the software menu from the control panel and no uninstallation icon into the program menu.
Restart installation don´t bring up deinstallation possibility. Allways the installer starts for new installation.
First time I setup the system completely new for a second time again. Last try now I rollback XP at the system restore point before trying to install TI.
From a problem into the past I had a tool call AcronisReport.exe. I try to make a system report by this tool. But I get the same problems. After choosen the report path for the file an click proceed the computer reborts immediately and after restart of windows I get the abort message for a service.
What is the reason?
How can I solve the problem?
I need TI because before I reinstall the computer there was a older version of TI on the system (8, 9 or 10; I don´t know exactly). There are several tib files form the old backups and I would connect them as a device so I can get some data form this backups.
We don´t made any other backup because in the past I don´t have such trouble with TI.
Who can help me?
Thanks

- Anmelden, um Kommentare verfassen zu können

Hello there Thomas ?
I know it has been a while since you posted, but is there a chance you can send a reply with an attachment of the file timntr_2k.sys ?
I am repairing XP Pro which aborts because that Acronis file is missing.
I am an old time user of Acronis 8.0, but the module didn't change, I don't think !
Problem is, I downloaded the product over the internet, and lost the file. And Acronis does not support 8.0 anymore, so I can't re download.
Many thanks if you can help !
Ken Siembida
- Anmelden, um Kommentare verfassen zu können

Hello there Thomas ?
I know it has been a while since you posted, but is there a chance you can send a reply with an attachment of the file timntr_2k.sys ?
I am repairing XP Pro which aborts because that Acronis file is missing.
I am an old time user of Acronis 8.0, but the module didn't change, I don't think !
Problem is, I downloaded the product over the internet, and lost the file. And Acronis does not support 8.0 anymore, so I can't re download.
Many thanks if you can help !
Ken Siembida
- Anmelden, um Kommentare verfassen zu können

To: Acronis Moderator
I know it has been a while since you posted, but is there a chance you can send a reply with an attachment of the file timntr_2k.sys ?
I am repairing XP Pro which aborts because that Acronis file is missing.
I am an old time user of Acronis 8.0, but the module didn't change, I don't think !
Problem is, I downloaded the product over the internet, and lost the file. And Acronis does not support 8.0 anymore, so I can't re download.
Many thanks if you can help !
Ken Siembida
- Anmelden, um Kommentare verfassen zu können

Ksiemb,
Refer your prior post
http://forum.acronis.com/forum/96330#comment-289182
- Anmelden, um Kommentare verfassen zu können