Aller au contenu principal

Acronis Rescue Media and Realtek controller

Thread needs solution

Dear All,

I describe all steps below :
- After installing Acronis Backup and Recovery v12497 or v12705, we create the Media Rescue.
- We boot up from the CD, we make the backup of this station to a external USB disk. (At this step no trouble).
- We restart the station, and when Windows XP SP3 boot up automatically, we cannot ping any other station present in the network. Ligths of the network device are off (green an yellow/green off).
- The solution I have found is to stop the station, unplug the PC 1 minute, plug it again, and the network controller works well (leds are on), and I could ping all others stations in the network.

This problem appears each time we backup stations with Realtek PCIe GBE Family Controller (FUJITSU Station type M470-2 or M570).

Other types of Controllers works well. Have you any solution for this trouble ?

Thank you for your answer.

0 Users found this helpful

Hello BERHAULT jean-Michel,

Welcome to our Forum, we're glad to greet you here! Thank you for finding time to open the thread regarding this issue, I will be glad to assist you.

I've checked all our internal resources, and found no mention of a known issue that would match your description. So this situation requires investigation. I wonder if you could gather the following diagnostic information: 

  1. Acronis Info from the problem machine
  2. Wireshark
  3. Acronis Linux Report from the bootable media

After that please open a support case with the information attached, and let us know its number.

Should you need anything else or have any further questions - feel free to contact us at your earliest convenience, we will be happy to help you!

Thank you!

Hi,

just had the same problem with HP ProDesk 400 with Win7 Pro x86 Fr SP1 (M$ Open version). Full updates.
Network :Realtek Gigabit Ethernet driver.
With both HP driver CD and updated version with DriverEasy 4.7.0.
Destination was : Transcend Storejet 1To USB3.0
Acronis 2014 TrueImage Media CD.

No lights too on Ethernet & switch.

Device manager reports Error Code 10 on Realtek Ethernet.

Jean-michel solutions works.

Hi,

I have done another test. I've restored the backup on another computer (same P/N). I didn't see network problem after reboot.
So, it seems that problem occurs only when making backup, not restoring.