Can't see Sata hard Drive
I'm not sure what the solution is for this dilemma. I have 2 Sata hard drives. Both identical Seagate 1TB. They are identified as Dive " E" and "F " in Winxp SP3. When I use the boot CD from True Image version 9 or the new 2010 it does not show both drives, only drive " E " . Is this a problem due to both being identical drives ? Any help would be much appreciated.
Thanks

- Accedi per poter commentare

Thanks for the reply.
The drive letters change, that I know. Unfortunately it only sees one of the drives, not both that are SATA. It sees the IDE ones fine. I've been searching the forums. There seems to be a bug in the boot loader that others are also experiencing with my hardware configuration. Acronis forum admins are PMing links to an ISO file that supposedly includes the correct drivers/instructions. I guess I'll have to wait for that ?? Seems odd that they would not include it on a brand new release.
- Accedi per poter commentare

Wish I could offer more help but others will probably jump in and see if they can assist. Good luck!
- Accedi per poter commentare

If E: is disconnected and you boot to the TI CD, does TI show the F: drive? This would help determine if the problem is the drive. I doubt the fact that they're identical is what's causing the problem.
You might also try a different SATA port (if one is available).
Does it make a difference if you use the quiet acpi=off noapic option detailed in Section II of the Read Before You Post thread?
- Accedi per poter commentare

Hello Michael,
Thank you for using Acronis Products
I can’t find any registered products under your account. Can you please send me the serial number for your version of Acronis True Image program via PM so I can send you an ISO image?
- Accedi per poter commentare

Dmitry wrote:Hello Michael,
Thank you for using Acronis Products
I can’t find any registered products under your account. Can you please send me the serial number for your version of Acronis True Image program via PM so I can send you an ISO image?
I am a registered user of True Image 11 and am having problems recognizing my SATA drives. Could you please send me the ISO image that you are talking about?
thanks
- Accedi per poter commentare

I too am a registered user, TI9, and would like this image. I have had issues with Rescue CD's not seeing SATA.
- Accedi per poter commentare

I also need that .iso file for SATA drives not being recognized. I have True Image 11.0.8027. It is registered.
- Accedi per poter commentare

I also need the iso file for problems with sata-drives. I have true image 11 latest build on win7.
Kind regards
Stephan
- Accedi per poter commentare

I have true image 11 that will not see my hard drives. I can send you my serial #
Allen
- Accedi per poter commentare

I have true image 11 that will not see my HP MV2120. Can I send you my serial # and get an ISO file?
Allen
- Accedi per poter commentare

Allen,
It may be best to just go ahead and send your serial number and the request to Dmitry (or another Acronis Moderator) via PM. There's probably no point in waiting for a response in the thread (it'll just make it take longer).
- Accedi per poter commentare

Hello all,
Anil, John, James, Stephan and Allen I have sent you ISO images of the respective version of Acronis True Image Home via PM.
James you have purchased an upgrade to Acronis True Image Home 2010, let us know if you need further assistance.
Stephan Acronis True Image 11 Home doesn’t support Windows 7, you will need the current version Acronis True Image Home 2010. You may purchase an upgrade using our online store.
You can find more information on how to burn an ISO image to a CD at:
http://iso.snoekonline.com/iso.htm
http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
Let me know if the issue persists.
- Accedi per poter commentare

I have 2009 home version, latest build. When attempting a restore from image, it doesn't see the internal hard disk of my Compaq laptop (which works fine). I've tried it from Windows (Vista), and from bootable media, both in safe mode and normal: no help. I understand the disk may be SATA and may require an ISO file. Can you supply? My product is registered.
- Accedi per poter commentare


I also need that .iso file for SATA drives not being recognized (Vista). I have True Image 11 registered.
- Accedi per poter commentare

I also need that .iso file for SATA drives not being recognized. I have True Image 11. It is registered.
- Accedi per poter commentare

I have just registered my TI 9 Home. Could I have the .iso file for my SATA drives not being recognized ?
Best Regards
- Accedi per poter commentare

Sorry, I did not see that I was supposed to download the latest build before to post a message in this forum and ..... it works right now ! My SATA disks are being recognized. ;-)
- Accedi per poter commentare

I have Acronis True Image 10 Home I tried the iso image on my account still can't see my sata hard drive in laptop from boot disk, please send me a iso image that will work.
mike
- Accedi per poter commentare

Michael, you are better off contacting customer support or sending a PM to one of the Acronis employees.
- Accedi per poter commentare

I too have the same issue. and I am a registered owner of both ADD 10 and ATIH 11. Both have problems detecting (seeing) my laptop SATA drive. Can you send me the ISO for both. Thanks
- Accedi per poter commentare